ADC120-24V

The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24 volt battery supplies. The speed of operation of the actuator is typically faster than competitive units, thus it provides more stable and rapid response to transient conditions. Applications include most block pumps, with or without mechanical governors, distributor type pumps, and medium sized carbureted engines. The 25 degrees of rotation expands the application to a wider variety of engines.

SPECIFICATIONS

PERFORMANCE:
Available Torque:	Max1.0Lb-ft(1.4Nm)
Maximum Operating Shaft Angular Travel:	25+1° CW/CCW
POWER INPUT:
Operating voltage:	12/24V DC
Normal Operating Current:	2 A at 12V DC,1A at 24V DC
ENVIROMENTAL:
Temperature Range:	-54 to 95°c
Relative Humidity:	up to 100%
All Surface finishes:	Fungus proof and corrosion resistant
PHISICAL:
Weight:	3.75 kg
Mounting:	Any position, electrical connector at the top preferred
RELIABILITY:
Vibration:	up to 20G @50-500 Hz
Testing:	100% Tested
MATING HARDWARE:
Connector:	Supplied With Actuator
Lever:	LE1500-2
Rod End Bearings(to attach a 12#20 HD linkage rod to lever):	BR200(Right Hand)
	BR201(Right Hand)
Wiring Harness HD225:	supplied with actuator