LBC2405

Designed for engine starting operation of battery charging, charging more. With constant voltage, constant current, a trickle floating, full automatic stop, short circuit, reverse connection, etc.
Many sections of the charging : constant voltage, constant current, a trickle charge, full automatic stop, extend battery life by 30%.
Charger has perfect resistance to short circuit and reverse connect protection, when the battery capacity is very minimal (resistance), load short circuit, or the charger connect to the mains to charge battery at the same time to start the engine at the same time, still for the constant current output current without damage, so when the battery as the starting power supply at the same time, the charger can not disconnect measures. For charge indicator LED charging status indication: red light when charging, full of rear light. The green power light With charging output interface failure, can be connected to the PLC, generator controller, such as charging fault alarm.In the low storage battery voltage, the short circuit, there is no ac power failure such as effective. With the BOOST up voltage function, compensation winter filling dissatisfaction phenomenon. Over temperature protection function. When the internal temperature automatic protection, return to work after being cool. Ensure the safety of the charger and battery.

Category	Project	Specification
Input Characteristic	nominal AC input voltage range	AC (100~240)V
	Max. AC input voltage range	AC (95~280)V
	AC frequency	50 Hz/60 Hz
	No-load power consumption	<3 W
	efficiency	AC 110 V		AC 220 V
		>82%		>86%
	Max. input active power	LBC 2405	LBC 2403	LBC 1206	LBC 1208
		168 W	97 W	90 W	118 W
	Max. Input current	2.9 A	1.8 A	1 A	1.5 A
Output Characteristic	No-load output voltage	27.6 V,error ±1%		13.8 V, error ±1%
	rated charging current	5 A,error ±2%	3 A,error ±2%	6 A,error ±2%	8 A,error ±2%
	rated output	135 W	85 W	83 W	111 W
Alarm Output	relay contact	0.5 A/250 VAC(Only useful with B suffixes, such as LBC2405B)
Insulating Property	insulating resistor	Input and output,input and shell both read DC500V 1min RL 500MΩ
	insulating voltage	Input and output,input and shell both read AC1500V 50Hz 1min leak current IL  3.5 mA
Working Situation	working temperature	(-30~55)°C
	store humidity	(-40~85)°C
	working humidity	20% RH~ 93% RH( no condensation)
	storage humidity	10% RH~ 95% RH(no condensation)
	weight	0.7 kg
Configuration	size	133 mm× 117 mm× 53 mm (length× width× height)